SKU: CRYO-CHIP
Semiconductor Cooling Chip — Peltier TEC Module for Cryolipolysis Machines
Replacement semiconductor cooling chip / Peltier TEC module for cryolipolysis fat freezing machines. The core cooling component that enables -15°C treatment temperatures. High-power TEC1-127xx series. Available in multiple power ratings. Paired with water+air cooling system for continuous 12-hour operation. CE & RoHS certified.
In Stock
📦 DHL/FedEx 5-10 Days
📋 MOQ: 1 Unit
Cooling Chip
Peltier TEC
Cryolipolysis
CE RoHS
Technical Specifications
| SKU |
CRYO-CHIP |
| Type |
Semiconductor Peltier TEC Module — TEC1-127xx Series |
| Dimensions |
40×40×3.8mm (standard) / custom sizes available |
| Max Temperature Difference (ΔT) |
68°C (hot side at 25°C → cold side at -43°C in ideal conditions) |
| Operating Voltage |
DC 12V (standard) / 15V available |
| Max Current |
6A / 8A / 10A (depends on model) |
| Cooling Power (Qc Max) |
50W-90W (depends on model) |
| Lifespan |
~10,000-20,000 hours |
| Certifications |
CE, RoHS |
| Warranty |
6 months |
⚠️ Important: Cooling chips come in different power ratings (TEC1-12706 / TEC1-12708 / TEC1-12710). Using the wrong chip can damage your machine or fail to reach treatment temperature. Send us a photo of your existing chip's label or measure its dimensions before ordering.
Frequently Asked Questions
How do I know which cooling chip model I need?
The chip model is printed on the chip itself (e.g., TEC1-12706). Send us a photo of the chip label — we will match the exact model. If the label is worn, measure the chip dimensions (40×40mm is standard) and tell us your machine model.
Signs of cooling chip failure?
Handle not reaching target temperature (stays above 0°C), temperature fluctuating wildly, or one side of the chip not cooling. Cooling chips typically last 10,000-20,000 hours but can fail prematurely from overheating or poor thermal paste contact.
Can I replace the chip myself?
Yes, if you are comfortable with basic electronics. The chip is mounted with thermal paste between a heat sink and cooling plate. Unplug the machine, remove the old chip, apply new thermal paste (included with purchase), and mount the new chip. Takes 20-30 minutes.
Request a Quote
Tell us your chip model (TEC1-127xx) or send a photo. We reply within 2 hours.
